|
|
The Video Cam Scout™ is completely programmable. All programming is done using the hand held remote and easy to follow on screen menus. There are 5 express settings that are pre-programmed and can be customized. The factory programmed express settings are show in the following table. Express Settings
There are 5 basic recording modes and these are as follows: 1) Triggered: AC power applications. The recorder remains powered in standby mode and records when triggered. 2) Triggered Low-Power: Battery power applications. The recorder powers down in standby mode, until triggered. 3) Continuous: AC power applications. The recorder records continuously once armed. 4) Video Triggered: AC or Battery power applications. The recorder remains powered in standby mode and records when video is detected. 5) Video Triggered Low Power: AC or Battery power applications. The recorder powers down in standby mode until video is detected. Programmable Settings Record Mode Four options: Triggered, Triggered Low Power, Continuous, Video Trigger and Video Trigger- Low Power
Record Speed Selects tape recording speed. Two options: Standard Play (1X) or Extended Play (3X)
Record Time After Trigger Selects after trigger record duration. 24 options: 15, 30, 45 seconds; 1-20 minutes, or until EOT (End Of Tape).
Auto Rewind Three options: No (default), Yes or Protected No: Stops recording at the end of tape. Yes: Automatically rewinds and re-records tape. Protected: Rewinds/Re-records but saves triggered events.
Exit Delay Time User specified exit delay (time until system accepts triggers after being placed in the ARM position). Six options: None (default), 1 thru 5 minutes.
Clear Event Memory Two options: No (default) or Yes No: Saves memory Yes: Clears memory
Use Timers User programmable On/Off times. Two options: No (default) or Yes No: Turns off timers Yes: Allows timer use
Setup Timers Two options: No (default) or Yes No: keeps current settings Yes: allows timer setup
Timers Start/stop: Allows specific start and stop time settings for each day of the week Action settings: Accept or Block Accept: System is activated by trigger Block: System ignore triggers | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||